38-0492 - WR 45 3 Gallon Gas Tank Set

WR narrow type 45 3 gallon gas tank set holds gas on both sides features raw finish. Tank set has 2 3/8 NPT fittings on each side for gas lines. Tank uses two vented gas caps which are not included.
Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be modified to use gas on the left and oil on the right. This application requires oil feed vent return and oil return pipe kit available separately. Right side for oil will require oil a stand pipe with 3/8 NPT outside and 1/4 NPT inside thread. Pipe extension must be within 1/2 top of the tank. The nipples on the tank measures 3/8 . Fittings in the bottom of the tank are 1/8 NPT for use with gas petcocks or fittings. *NOTE: Order mount kit 1936-46 shift gate related plugs and caps separately. Before installation or painting check gas tank for any flaws. Do not grind or sand seams or welded joints. Clean the inside of the tank and pressure test. Check petcock openings ensuring petcock can be easily installed. Use proper hardware for the installation process. Please install tank with fittings in frame with motor installed before painting.

Fits:
W 1936-1952
WR 1941-1952

UOM: SET
Country Of Origin: TAIWAN

Accessory Items:
49-0945 - 6:1 High Compression Head Set Aluminum
50-1159 - 45 Bobbed WR Rear Fender Raw
38-0497 - WR 45 2.5 Gallon Gas Tank Set
38-0496 - WR 45 2.0 Gallon Gas Tank Set

Tech Notes: Suggested to use with #40-0283 WR Gas Tank Fittings. Suggested to use with #49-0040 or #49-1317 45 Shifter Gate. WR style gas tank set may require installer to indent bottom of tank for head or other clearances required. Suggested to use with #38-0973 Tank Mount Tab Set Raw if builder wants to update to rubber mounted tanks. Original tabs must be removed and new ones welded in place. Suggested to use with #40-0689 WR Oil Line Kit. *CAUTION: Before paiting or fitting check seam welds for stress marks or possible flaws that would allow tanks to leak.
Measurement: Widest Point: 4-1/2 inches