35-0286 - WR Linkert Intake Manifold

Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.
NOTE: For WR and K use order correct manifold nuts and seals separately. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct. For the float arm installation the center prong of the float arm should have .003 of clearance in order for the arm and needle to move freely.

Fits:
K 1952-1956
KH 1954-1956
WR 1941-1952

UOM: EA
Country Of Origin: TAIWAN
OEM Cross Reference: 27020-40

Suggested Items:
9664-8 - Parkerized Linkert Carburetor Mount Screws
7104-2 - Brass Intake Manifold Seals

Accessory Items:
15-0262 - Linkert Carburetor Spacer
8006-2 - Intake Manifold Seal Set
8007-2 - Cadmium Manifold Nuts
35-0937 - WR Conversion Intake Manifold Kit

Tech Notes: To install the WR manifold on a 45inch cylinder on W and G models the intake manifold nipples must be replaced with #9423-1 larger nipples. Suggested to use with #35-1707 Manifold Nipple Set To be installed on WL models 0.100inch must be machined from eash spigot for a total of 0.200inch overall. Suggested to use with #35-1952 Intake Manifold Nut Set.
Measurement: Intake Bore I.D.: 1-9/16 inches