Browse by category:
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 7.25 INCHES WIDE REAR APPLICATION 15 3/4 RADIUS 16 OR 18 INCH WHEELS.
$99.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 8.5 INCHES WIDE REAR APPLICATION 13 3/8 RADIUS 16 INCH WHEELS
$119.99 Call to Order
CHROME REVTECH HIGH PERFORMANCE MAGNETIC LONG SPIN-ON OIL FILTER. FITS 5-SPEED MODELS(EXCEPT DYNA-GLIDE)1980- UP SPORTSTER MODELS LATE 1984-UP ALL SOFTAIL MODELS 1984-UP.REPLACES OEM#63796-77 14-028A
$11.99
KEIHIN CARB REBUILD KIT VITON RUBBER COMPONENTS RESISTS SWELLING-FITS 76-87 CARBS (EXCEPT CV)
$27.99
Rubber Instrument Mounting Gasket With Visor Replaces OEM 67039-83 Fits: 1983-1994
$9.99 Call to Order $14.99
Chrome forward shift control fits XL models 1954-74 with Right Side shift.
$85.99
5 GALLON STRETCHED FLATSIDE FATBOB TANK SET WELD-ON SECTIONS AT REAR OF TANKS FITS 1984-96 SOFTAIL MODELS BODY WORK REQUIRED TO BLEND IN WELDED ON REAR SECTIONS.
$239.39 $251.99
REVTECH PURE 60 WEIGHT MOTORCYCLE OIL *** CASE OF 12 QUART BOTTLES ***
$89.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 7.25 INCHES WIDE REAR APPLICATION 13 3/8 RADIUS 16 INCH WHEELS
COLE FOSTER BOBBER FUEL TANK BRING THE OLD STYLE BACK TO YO BIKE. AS SEEN ON THE LITTLE BL FITS 84-99 SOFTAIL FRAMES 600155
$269.79 $283.99
TROCK EVO LAPPING RING--USED TO FLATTEN WARPED CYL. SURFACES FOR BETTER SEALING
$0.00 Call to Order
REVTECH PURE 20W50 MOTORCYCLE OIL *** CASE OF 12 QUART BOTTLES ***
FLYWHEEL TRUING STAND FITS ALL HARLEY MOTORS 18" CAPACITY - ACCURATE TO .002 INCH.
$825.00 $937.73
PACK OF FOUR REVTECH OIL CHANGE KITS EACH KIT INCLUDES 3 QUARTS OF REVTECH 20W50 ENGINE OIL AND REVTECH CHROME EXTRA LONG MAGNETIC OIL FILTER TO FIT 1992 UP BIG TWINS AND SPORTSTER MODELS FROM 1984 TO PRESENT
$131.99 Call to Order
REVTECH PRIMARY LUBE. CASE OF 12 ONE-QUART PLASTIC BOTTLES. CUSTOM CHROME INC.
$79.50
CATEYE DASH & MOUNTING KIT (LESS SPEEDO) FIT FATBOB TANKS 1947-UP.
$88.99
REVTECH 6-SPEED 3-5 GEAR SHIFT FORK
$33.99 Call to Order
Chrome Porthole Derby Cover for Big Twin 1970-1998
$74.99
Chrome Porthole Style Covers 4 Speed FL and FX models 1965-1986 and Softail and Dyna 1984-2006
$39.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 8.5 INCHES WIDE REAR APPLICATION 15 3/4 RADIUS 16 TO 18 INCH WHEELS
$119.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 9 INCHES WIDE REAR APPLICATION 13 3/8 RADIUS 16 INCH WHEELS.
$124.99
REAR FENDER W/TURN SIG MT HOLES & T/L MT OEM REPLS 59596-89 FITS FLSTF (FATBOY) 1989-97 REPLACEMENT FENDER FOR FXST S CONVERTING TO FULL ONE PIECE FENDERS ALSO
CHROME PLASTIC SKULL 1/4 BOLT COVERS KNURLED ALLEN HEAD BOLT COVERS PACK OF 20 (IF USED ON SMOOTH HEADS SILICONE ADHESIVE MAY BE REQUIRED NOT INCLUDED).
$7.99
Fits RevTech 100" & 88" engines with 99/00 casting marked rocker boxes.
$69.99 Call to Order
REVTECH INTAKE VALVE OVERSIZE-1.940 DIAMETER FITS CCI REVTECH HEADS CUSTOM FIT IN ALL OTHERS
GASKET SET. FITS CCI#28555 SMOOTH ROCKER BOXES THAT WERE PRODUCED BEFORE YEAR 1999.
$31.99
Chrome die cast mirage convex mirror set. "Assholes in mirror are bigger than they appear" etched in glass. Sold in pairs only. Also available in Black.
$75.99
CHROME TRIPLE HOSE SEPARATOR FITS 3/8
$10.99
CHROME REVTECH HIGH PERFORMANCE MAGNETIC SHORT SPIN-ON OIL FILTER.REPL.OEM#63782-80 FITS SPORTSTER MODELS 1980-EARLY 1984 4SPEED BIG TWIN MODELS(EXCEPT SOFTAIL)LATE 1982-86 WITH FACTORY INSTALLED SPIN-ON OIL FILTER.
REVTECH OIL-SAE 25W60 (12)
$82.50
REVTECH 2 80 000 VOLT DUAL FIRE DUAL TOWER COIL HI-OUTPUT COIL WORKS WITH ELECTRONIC IGNITIONS FITTED TO BIG TWINS AND SPORTSTER MODELS FROM 1980 TO PRESENT. ** FITS UNDER STOCK COIL COVERS!!! **
CHROME DIE CAST ROCKER COVER KIT FITS: ALL EVOLUTION SPORTSTER MODELS 1986-97 KIT INCLUDES: TOP MIDDLE BOTTOM ROCKER BOX COVERS HARDWARE AND GASKETS
$192.99
CHROME FRONT BRAKE MASTER CYLINDER ASSEMBLY. FITS ALL HARLEY MODELS 1972-1981. REPLACES OEM# 45010-73
$87.99 Call to Order
INNER CLUTCH HUB FITS EVOLUTION BIG TWINS 90-97 RPLS. OEM #37550-90A ** CCI IS AN INDEPENDENT DISTRIBUTOR AND IS NOT AFFILIATED WITH HARLEY DAVIDSON INC.**
$51.99
'Two Eight' 10.5" Wide Custom 18 Gauge Steel Rear Fender. Undrilled For Custom Use. Fits Radical-Custom Extra Wide 10.5" Frames With 230 Series 15 Tire. **Install For Fit Before Painting**
$149.99
KEIHIN CARBURETOR REBUILD KIT-COMPLETE FOR ALL CARB 1976-87 CUSTOM CHROME INC.
$12.99
COMPENSATING SPROCKET COVER ASSEMBLY WITH SPRINGS. REPLACES OEM# 40384-91 FITS BIG TWIN MODELS 1991 TO PRESENT.
'OneTonHo' 7.5" Wide Rear Fender 18 Gauge Steel. Undrilled For Custom Use. Fits 7.25 Wide Rigid Frames **Install For Fit Before Painting**
$139.99
FOOTPEG ANTI-SAG SPRING STEEL D-CLIP. FITS ALL HARLEY MODELS TO PRESENT EQUIPPED WITH MALE MOUNT PEGS THAT DROOPS OR SAGS REPLACES THE OEM# 50912-72 D-CLIP TO LIFT OR LEVER OUT YOUR FOOTPEGS.
$9.99
MAINSHAFT EXTENSION FOR CSI# 050046 and 050047 5 SPEED KICK KITS
$23.99 Call to Order $39.95
Doss 'Dixie' Fenders - Rear Fenders - 7 1/4" wideRICK DOSS "DIXIE" FENDER. 18 GA. STEEL 7.25" REAR, MATCHES FRONT DIXIE FENDERS MUST BE DRILLED AND FITTED BEFORE PAINTING 620102
Chrome Porthole Type Points Cover for Big Twin and Sportster 1984-1999
$37.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 10.5 INCES WIDE REAR APPLICATION 15 3/4 RADIUS 16 TO 18 INCH WHEELS
$129.99
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 6 INCHES WIDE FRONT APPLICATION 15 3/4 RADIUS 16 OR 18 INCH WHEELS
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 10.5 INCHES WIDE REAR APPLICATION 13 3/8 RADIUS 16 INCH WHEELS
STEEL FENDER BLANK FOR THE CUSTOM BIKE BUILDER 6 INCHES WIDE FRONT APPLICATION 13 3/8 RADIUS 16 INCH WHEELS
PAD ORGANIC HAWG HAULTERS REVTECH/CCI 4POT CALIPER FRP408ST P66 FA95 DP614 SBS566 VD945 CUSTOM CHROME
$18.99
41MM CHROME BILLET SPEEDO BRACKET MOUNTS TO YOUR 41MM FORK LEG AND HOLDS A 48MM MINI SPEEDOMETER GAUGE. SPEEDOMETER NOT INCLUDED 669902
$65.99
